Added Idle scripts

Workers/workDir/idleControl.py

+from piglow import PiGlow
+import time
+import socket
+import subprocess
+import psutil
+from random import randint
+import urllib2, json
+p = PiGlow()
+val = 100
+colour = 1
+
+def sendCommand(command):
+        p = subprocess.Popen(command.split(" "), stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+        (stdout, stderr) = p.communicate()
+def getControlData():
+    rawData = urllib2.urlopen("http://192.168.1.1/network").read()
+    print(rawData)
+    controls = json.loads(rawData)
+    print(controls)
+    host = socket.gethostname()
+    print(controls[host])
+    return controls[host]
+p.green(255)
+time.sleep(30)
+delay = 0.05
+while True:
+    try:
+        p.all(0)
+        if getControlData():
+            print("in")
+            p.white(10)
+            time.sleep(delay)
+            p.blue(20)
+            time.sleep(delay)
+            p.green(30)
+            time.sleep(delay)
+            p.yellow(40)
+            time.sleep(delay)
+            p.orange(50)
+            time.sleep(delay)
+            p.red(60)
+            time.sleep(delay)
+            p.white(255)
+            time.sleep(delay)
+            p.red(0)
+            time.sleep(delay)
+            p.orange(0)
+            time.sleep(delay)
+            p.yellow(0)
+            time.sleep(delay)
+            p.green(0)
+            time.sleep(delay)
+            p.blue(0)
+            time.sleep(delay)
+            p.white(0)
+            time.sleep(delay)
+        else:
+            p.all(0)
+            #time.sleep(0.5)
+    except Exception as e:
+        print(e)
+        p.all(0)
+        p.red(255)
+        p.white(255)
+

Workers/workDir/idleNet.py

+import time
+import sys
+from neopixel import *
+import argparse
+from random import randint,choice
+import socket
+import urllib2, json
+# LED strip configuration:
+LED_COUNT      = 100      # Number of LED pixels.
+LED_PIN        = 18      # GPIO pin connected to the pixels (18 uses PWM!).
+#LED_PIN        = 10      # GPIO pin connected to the pixels (10 uses SPI /dev/spidev0.0).
+LED_FREQ_HZ    = 800000  # LED signal frequency in hertz (usually 800khz)
+LED_DMA        = 10      # DMA channel to use for generating signal (try 10)
+LED_BRIGHTNESS = 255     # Set to 0 for darkest and 255 for brightest
+LED_INVERT     = False   # True to invert the signal (when using NPN transistor level shift)
+LED_CHANNEL    = 0       # set to '1' for GPIOs 13, 19, 41, 45 or 53
+
+strip = Adafruit_NeoPixel(LED_COUNT, LED_PIN, LED_FREQ_HZ, LED_DMA, LED_INVERT, LED_BRIGHTNESS, LED_CHANNEL)
+strip.begin()
+
+def getControlData():
+    rawData = urllib2.urlopen("http://192.168.1.1/network").read()
+    print(rawData)
+    controls = json.loads(rawData)
+    print(controls)
+    host = socket.gethostname()
+    print(controls[host])
+    return controls[host]
+
+while True:
+    if getControlData():
+        r,g,b = randint(0,255),randint(0,255),randint(0,255)
+        strip.setPixelColor(randint(0,65),Color(r,g,b))
+        strip.show()
+    

Workers/workDir/idleOff.sh

+ echo \{\"worker1\":0,\"worker2\":0,\"worker3\":0,\"worker4\":0,\"worker5\":0,\"worker6\":0,\"worker7\":0,\"worker8\":0\}  > /var/www/html/control/index.html 
+ echo \{\"LegionDisplay\":0,\"LegionHead\":0,\"LegionFile\":0\} > /var/www/html/network/index.html

Workers/workDir/idleOn.sh

+ echo \{\"worker1\":1,\"worker2\":1,\"worker3\":1,\"worker4\":1,\"worker5\":1,\"worker6\":1,\"worker7\":1,\"worker8\":1\}  > /var/www/html/control/index.html 
+ echo \{\"LegionDisplay\":1,\"LegionHead\":1,\"LegionFile\":1\} > /var/www/html/network/index.html